Skip to content

Experience the future of energy with Parachew, powered by pure paraxanthine.

Parachew, Energy Delivered

What Is Actually in a Paraxanthine Chew? How to Read the Supplement Label Before You Buy

November 10, 2026 · 7 min read · McAb Nutra


Person learning how to read a supplement label on a Parachew jar in a sunlit kitchen

Learning how to read a supplement label takes about two minutes and keeps you from buying on hype. Check the serving size, the active amount, the other ingredients and the warnings, in that order. This walkthrough uses the label on Parachew paraxanthine gummies as the working example.

By McAb Nutra, McAb Nutra

Every dietary supplement sold in the US carries a Supplement Facts panel, and the FDA sets the labeling rules for it. The FDA does not approve supplements before they reach shelves, so the label on the jar is your main source of truth. Read supplement labels from top to bottom: serving size, amount per serving, percent daily values, other ingredients, then warnings. That order matches how a careful buyer decides.

What is actually in a paraxanthine chew?

Paraxanthine is a metabolite of caffeine, the compound your body makes as it breaks caffeine down. It is the metabolite behind energy without the jitters, anxiety or crash, which is why the chew works as a swap for coffee. Each Parachew gummy holds 200 mg of enfinity paraxanthine plus 25 mcg of vitamin B12. A clear jar holds 30 sugar coated dome gummies in Caramel Coffee or Strawberry Lemonade.

Researchers study paraxanthine for its effects on the central nervous system, alertness, cognitive function and cognitive performance. Parachew's science page lists 23 primary sources. Vitamin B12 is the second active, a vitamin tied to energy metabolism, the process that turns food into usable energy.

The label says not for use with caffeine or other stimulants. Add up your daily caffeine consumption first, then replace it instead of stacking the two.

How do you read a supplement facts panel?

Work through the panel in four passes:

  1. Top block: serving size and servings per container.
  2. Middle block: calories and nutrients, each with an amount and a percent daily value (% DV).
  3. Active amounts: vitamins, minerals and other ingredients in mg or mcg. An ingredient with no established DV shows a symbol instead of a percentage.
  4. Bottom block: other ingredients, allergen statements and the maker.

Then read the footnote. Statements about how an ingredient supports the body carry a line saying the FDA has not evaluated them. That is standard labeling, not a warning sign.

What do serving size and active amounts mean on a supplement label?

The serving size is the amount every number on the panel describes. If a panel lists a dose for two gummies, one gummy holds half. Parachew reports its figures per gummy, and the recommended use is 1 to 2 gummies a day, with a 400 mg paraxanthine maximum. Do the math before you compare: 200 mg times 2 gummies is 400 mg, and a 30 gummy jar lasts 30 days at one a day or 15 days at two.

Apply the same test to anything you line up against a chew. A paraxanthine drink has its own serving size, so confirm whether its mg figure covers the whole can or a portion before you compare.

How does sugar label reading work?

Sugar label reading starts with two lines: total sugars and added sugars. Total sugars include sugars found naturally in ingredients. Added sugars are the ones put in during making. The DV for added sugars is 50 grams a day, so the percentage is quick to check. Parachew lists 3 g of sugars per gummy, all added, which is 6% DV (3 divided by 50).

Each gummy also carries 20 calories and 5 g of carbohydrates. At the 2 gummy daily maximum, that doubles to 6 g of sugars, 40 calories and 10 g of carbohydrates. Write down the numbers for the amount you would actually take.

Handwritten serving math on a notepad beside a phone calculator at an outdoor cafe table

How to Read the Ingredients List on Food Labels

The ingredients list on food labels runs in descending order by weight. The first item is the heaviest and the last is the lightest. That answers what determines the order of ingredients: weight, not importance. On a supplement, the actives sit in the panel and everything else falls under Other Ingredients, which follows the same weight order.

Three things to scan in that list:

  • Allergens and diets. Parachew's label says vegan, nut free, gluten free, soy free and dairy free, made in an allergen free facility.
  • Sodium. Caramel Coffee lists 2 mg of sodium. Strawberry Lemonade has no sodium row, so any sodium comparison has to name the flavor.
  • Seals. The jar carries GMP and Made in USA seals. GMP stands for good manufacturing practices, a standard for how a product is made. USP is different: the United States Pharmacopeia runs a separate verification program, and a USP mark means an outside group tested the contents. Check which seal you see and who issued it.

Supplement Labels and Food Labels Side by Side

What is on a nutrition facts label?

A nutrition facts label covers conventional foods and drinks. It lists serving size, servings per container and calories in large type. Below that come total fats, saturated and trans fats, cholesterol, sodium, total carbohydrates, dietary fiber, total sugars, added sugars and protein. Vitamin D, calcium, iron and potassium are the required vitamin and mineral lines. Each has a percent DV, so you can judge nutrient content at a glance.

What is the difference between a supplement label and a nutrition facts label?

Feature Supplement Facts Nutrition Facts
Used on Dietary supplements Conventional foods and drinks
Starts with Serving size and servings per container Serving size and servings per container
Typical lines Vitamins, minerals, botanicals Fats, cholesterol, sodium, fiber, sugars
Daily values Shown only where one exists Shown for most nutrients
Bottom of label Other ingredients Ingredients list nearby

Knowing how to read a supplement label and a food label gives you two lenses on the same question: what am I taking in, and how much?

How to read food labels for healthy eating

Start with serving size, because every other number scales from it. Next, scan calories, then the nutrients to limit (added sugars, sodium, saturated fat) and the ones to get enough of (fiber, calcium). Use the FDA's rule of thumb: 5% DV or less is low, and 20% DV or more is high. Judge the result against your own diets and goals, not a universal target.

Why read nutrition labels at all? The front of the package markets a product, and the back reports what is in it. Comparing the back of two packages puts them on equal footing.

Where can you find food labels examples?

The FDA publishes guides to the Nutrition Facts label with annotated sample panels. For supplements, the NIH Dietary Supplement Label Database lets you search real panels and compare them. Barcode apps that read nutrition labels also exist, but they pull from databases that can lag behind a reformulation, so check the jar in your hand.

What Red Flags Should You Look For on a Supplement Label?

  1. A blend total with no per-ingredient amounts. You cannot compare a dose you cannot see.
  2. Disease claims. Supplements may describe how an ingredient supports a body function. They may not promise to cure or treat illness.
  3. A serving size that does not match the directions. The numbers and the instructions should describe the same amount.
  4. Missing warnings or maker details. A label should name who made it and spell out limits and side effects worth knowing. Parachew's are plain: 400 mg daily maximum, and not for use with caffeine or other stimulants.
  5. Seals you cannot trace. A seal should name the group behind it.
  6. Reading a huge percent as a bonus. B12 shows 1042% DV on Parachew's label because the DV is only 2.4 mcg: 25 divided by 2.4 is about 10.4, or 1042%. Read the amount, not just the percent.

Once a jar passes this list, the Parachew product page shows both flavors, and Add to Cart defaults to a monthly subscribe option.

Matching the Label to Your Situation

Here is how to read a supplement label for your own situation:

Your situation Check this line What to look for
Swapping out coffee Active amount and warnings 200 mg paraxanthine per gummy, plus the not for use with caffeine warning
Watching sugars Added sugars and calories 3 g sugars (6% DV) and 20 calories per gummy
Diets or allergies Other ingredients Vegan, nut free, gluten free, soy free, dairy free
Limiting sodium Sodium row 2 mg in Caramel Coffee, no sodium row in Strawberry Lemonade
Judging value Servings per container 30 gummies per jar, so 15 to 30 days at the recommended use

What you pay per day depends on the dose per gummy, how many gummies you take, the count in the jar, and whether you buy once or subscribe. Parachew's policy is that all sales are final, with refunds only for defective, damaged or incorrect items reported within 7 days of delivery, so do this label check before you order.

Ask the Parachew Team About Any Line on the Label

Still unsure about a line on the jar, or how a number fits your routine? Reach Parachew support and ask before you order.

Ready to Try Clean Energy?

One gummy. Clinical dose. Zero crash.

Shop Parachew